Panoz AIV Speedster!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Munoz
    replied
    The "Speedster" is for sale on hemmings.com

    Leave a comment:


  • TXFM
    replied
    I thought I had a recent side shot with the Brembos and the speaker change to fire extinguisher, but this is the closest I have of a side shot with roll bar.

    I had someone make and install the roll bar.

    I did all the work on the e-brake, and it's not too tough to engage. But, I do have to lean over to pull it.
    Attached Files

    Leave a comment:


  • PanozBob
    replied
    I like the rollbar. Is the ebrake tough to reach? You did the work yourself?

    Please post a side profile shot of the car.

    Leave a comment:


  • TXFM
    replied
    AIV Mods - Rollbar

    Oh - forgot the pic with the rollbar.
    Attached Files

    Leave a comment:


  • TXFM
    replied
    AIV Mods

    This pic shows some modifications I made to my '98 AIV.
    I moved the e-brake to the floor of the passenger side and relocated the speakers. I used to hit my elbow on the e-brake lever when shifting.
    Attached Files

    Leave a comment:


  • WMUCarGuy
    replied
    I also just realized the car has had its central rear reverse light and 3rd brake light removed and I don't see another one anywhere.

    Leave a comment:


  • WMUCarGuy
    replied
    I was just thinking, I wonder if the front turn signals on this car are mounted within the mesh covered holes where the bumpers used to come from?

    Leave a comment:


  • WMUCarGuy
    replied
    Originally posted by PanozBob
    By far the coolest Roadster or (yes Speedster would be appropiate) that I have seen. I actually like the slit front hood better of the black car than the solid one on your rendering but that is just each persons individual taste.

    I wonder if Panoz Development did the customizing or someone else? These speedsters have come down to a very affordable mid tweenties price range, and I think a custom one like this would make a nice affordable long term investment. Probably best for a person in a sunshine state to own though.
    Yea, that's one of the reasons I really LOVE this car, it's a truly affordable dream car! And I do plan to own one someday! I think I'll go with either sunburst yellow, metallic blue, or pearl white. Ferraris and Lambos are great and all, but how many of us can really afford to buy and maintain a car like that? Plus (at least where I live), Ferraris and Lambos have become quite plebeian...

    I wonder if JRD may have had a hand in this car???
    Last edited by WMUCarGuy; 12-26-2009, 12:31 AM.

    Leave a comment:


  • Ackmann
    replied
    Best looking Roadster I've have ever seen as well. I dont care for the steering wheel though. Love the low profile wrap around windshield and actually like the rear view mirrors on this car. I would probably have to real think seriously about buying this car if it turned up for sale. If I ever did buy this I think I would brush aluminum the front light housing, Brush aluminum the center console surround and door peices and then put a modern verson of a classic wooden steering wheel in it. SWEET!

    I see what your saying about the hood scoop and front bonet being one. It would look better. However, with this car, I think I would open it up and have a polished Super Charger sticking slightly above the hood line to go along with the other ideas I expressed above.
    Last edited by Ackmann; 12-25-2009, 07:29 PM.

    Leave a comment:


  • PanozBob
    replied
    By far the coolest Roadster or (yes Speedster would be appropiate) that I have seen. I actually like the slit front hood better of the black car than the solid one on your rendering but that is just each persons individual taste.

    I wonder if Panoz Development did the customizing or someone else? These speedsters have come down to a very affordable mid tweenties price range, and I think a custom one like this would make a nice affordable long term investment. Probably best for a person in a sunshine state to own though.

    Leave a comment:


  • WMUCarGuy
    replied
    I think the one additional change I'd have made if I had one is to have the hood scoop made of aluminum and have a fabricator weld and finish it to the hood so it look like one piece. I've always thought the scoop looked like an afterthought (because it was) and it was the one thing that looked kind of poorly done on the car. So here's a pic i had photoshopped a few years ago from an AIV I saw in Michigan with the hood scoop incorporated into the hood as well as the bumpers and turn signals removed, and I think it looks MUCH better! Add on that speedster windscreen and you'd have the hottest AIV ever!

    Leave a comment:


  • WMUCarGuy
    started a topic Panoz AIV Speedster!

    Panoz AIV Speedster!

    So I'd seen a photo of this particular car and LOVED it, and then one day I was driving through Redondo Beach, CA and stopped dead in my tracks. There it was, the car I've dubbed AIV "Speedster", and the coolest Panoz road car in existence if you ask me!

    From what I could tell, modifications from stock include
    - Cut down, wrap-around windscreen, removal of the bumpers with the bodywork filled in and rear view mirror moved to top of dash
    - Removal of the turn signals with bodywork filled in (I didn't see replacements, so I'm guessing he's rigged the headlights to blink in some fashion)
    - Wire mesh added to the grilles and hood scoop
    - New side rear view mirrors (not crazy about the style of them)
    - Tonneau cover for interior
    - Removable Sparco steering wheel
    - Removal of rear, central reverse light and 3rd brake lamp
    - And probably a lot more that I haven't noticed!

    Regardless, this is undoubtedly the coolest AIV on the road and if I ever buy one, I'd probably have it made to look very similar to this one!

    Full gallery: http://s591.photobucket.com/albums/s...V%20Speedster/







    Last edited by WMUCarGuy; 12-25-2009, 11:55 PM.
Working...